h4831sc for Dummies

h4831sc for Dummies

Blog Article

I am a true enthusiast from the H4831 powder. I get terrific velocity and accuracy from any caliber I've attempted it in. From the twenty five-06 up on the 338 it's my head to powder of decision. I check out all sorts of powders when Performing up loads, nevertheless the H4831 usually seems to arrive out on prime for accuracy and velocity when the case is from the 06 class or larger sized.

I gave up on it and went to other powder if the new powder was creating additional force and was slower compared to the old things. I do not try to remember if I even tried using regular h4831 or not; I am considering not. Click to expand...

This is probably the biggest factors reloaders are admonished to work with new data only; and to start out low when you obtain a brand new lots of powder. You do not truly know (Unless of course the organization informs you so) that the new lot of powder was even produced at the identical factory because the powder you got a several years back.

Minnesota H4831SC is my check out inside the 7mm Rem Mag, but I am preserving the little I have left for drop 2021. I might begin minimal and get the job done your way up, depending on what load data you take a look at for this combo the min/max loads are all around the board.

INgunner54 mentioned: It has been a bit, but I did get some 4831 SC to try. Identified a node and shot some teams.

WARNING: This solution can expose you to steer, which is known towards the State of California to lead to most cancers and start defects or other reproductive harm. For more information go to – .

I'm applying it having a 210 Berger. In h4831sc my rifle, H1000 was not as exact. RL22 did very well but I used to be a little bit worried about temp balance. I think I'm at 72 grains and obtain around 2850ish fps

excaliber mentioned: I have located the exact reverse for being true in my gun. H4831SC was the slowest powder with a hundred and eighty g Accubonds. RL22 was a much faster and Similarly correct powder in my 300 Acquire Mag.

WA I might recommend a slower burner that could give improved circumstance density like H1000 or IMR 7977, especially if you're loading heavies h4831sc load data extended.

It is really amusing how over time loading innumerable unique cartridges in many different rifles which i have not acquired acceptable finish outcomes with H-4831 or maybe the shorter-Slice Edition.

Run your load up with the precise powder (sc or standard) and great deal h4831sc load data that you are employing though. Same burn level doesn't suggest it's going to behave "precisely" exactly the same. I have witnessed more than a hundred fps difference between sc and mil-surp plenty of H4831.

The "SC" stands for Limited Cut. I have not found a difference between possibly powder dut I don't Feel I'd personally mix them.

arkansas or ohio i under no circumstances noticed a big difference besides the regular is like rolling cordwood onto the the pan.

I discovered that my 7mag one hundred sixty partitions had been sub MOA with 4831sc with reduced to min charges. I’m conversing 2700 (possibly 2800) fps, it was a low 60s grain cost within a Norma case. Not what I had been trying to find, but precise nonetheless.